X-GRID DISPOSABLE PLASTIC STATIC MIXERS

Plastic X-Grid Disposable Static Mixers (High Performance Design)

X-Grid plastic disposable static mixers are available in three (3) configurations (GXF, GXP and GXR-P). Due to their high cost relative to the Helical static mixer design, they are recommended only for Difficult Mixing Applications (see page 2-right column) where a standard Helical Static Mixer has demonstrated that it is not acceptable for the service.

Benefits of X-Grid plastic static mixers are their ability to mix materials with very large differences in viscosity and volumetric

'X Grid disposable plastic mixers are the proven solution for processing small flow rates in difficult meter-mix-dispense applications such as adhesives, varnishes, urethanes, sealants, liquid silicone rubber (LSR), etc'

Type GXF Disposable Plastic Mixers

Group of X Grid Disposable Static Motionless Mixers
GXF Plastic Disposable Static Motionless Mixers

Brochures & Technical Downloads

(For Adobe free reader click here)

The GXF plastic disposable static mixer (patent pending), has the same fundamental X-Grid crossing bar structure as the GX static mixer.  The GXF has an added constructional feature of a hinged support ring that surrounds the X-bar mixing grid structure that allows for complete chains to be injection moulded and folding into a mixing structure.

 

The GXF static mixer is available at present in a 12 mm OD size. Elements can be supplied as individual loose element chains for installation into a customer supplied housing or as Complete GXF Plastic Disposable Static Mixing Units in a plastic housing with bell connection and stepped tip.   They can also be supplied in metal tubing with a varying choice of connections.

 

Material: Polypropylene (PP)

Type GXP Disposable Plastic Mixers

GXP Plastic Disposable Static Motionless Mixers

The GXP plastic disposable static mixer has the identical X-Grid crossing bar structure as the GX static mixer.  The GXP static mixer is available at present in a 9.3mm (PP) and 9.4mm (PA66) OD size.

 

Material: Polypropylene (PP) and Glass Filled Nylon (PA66)

The GXP elements can be supplied as individual loose element chains for installation into a customer supplied housing or as Complete GXP Plastic Disposable Static Mixing Units in a plastic housing with bell connection and stepped tip.   They can also be supplied in metal tubing with a varying choice of connections.

Type GXR-P Disposable Plastic Mixers

GXR-P Plastic Disposable Static Motionless Mixers

The GXR-P plastic disposable static mixer has the same fundamental X-Grid crossing bar structure as the GX metal static mixer and GXP plastic static mixer.  The GXR-P however has an added constructional feature of a support ring surrounding the X-bar mixing grid structure. This support ring greatly enhances strength and allows for safe hydraulic press ram removal of the mixing elements from the housing with resin cured inside the static mixer structure.

 

Material: Glass Filled Nylon (PA66)

The GXR-P mixing elements are available at present to fit a 30mm ID pipe/housing and are used for large flow rate applications. Each mixing element contains a pin & hole arrangement for correct alignment of adjacent mixing elements. Supplied as mixing elements only or complete units with pipe housing and end connections.

Helical Plastics Disposable Mixer

Copyright Invotec Solutions Limited 2013 - Invotec Extra is a trading name of Invotec Solutions Limited